Small Machinery
We have mortars with a working volume of 0.2 liter to 7.0 liter, and the materials are porcelain, alumina, granite, gunmetal, stainless steel, etc. and various types of pestle such as wood, Teflon, etc. We also offer machines (vacuum type) that support stirring and crushing while heating and cooling, and vacuum (decompression) and stirring and crushing by gas replacement.
- Desk Top Type(Standard type)
A machine in which the performance and basic functions of the Ishikawa type stirring and crushing machine are stored in a compact housing. SUS case is standard equipment. Suitable for use in R&D in clean rooms and glove boxes
D101S/D16S/D18S/D20S/D22S
Desktop type (Standard type)
The stirring and crushing mechanism of the Ishikawa type stirring and crushing machine (Freestanding type) has been taken over, and the basic functions have been stored in a compact case.The mortar is easier to pull out.
Working volume (L): 0.2/0.4/1.0/2.0/4.0
Housing: SUS304 (stainless steel) or baking finish (white color)
D20SL
Desk top type (Standard type) pestles lifting type
By rotating the handle attached to the machine, the upper part (head) of the machine moves up and down, which is convenient for replacement, putting in and out of the mortar, and putting in and taking out of materials. We can also produce D22SL with a working volume of 4.0ℓ.
The picture above shows the machine in the upper pestle position, which makes it easier to attach/remove the pestle and take out pots. Please keep the pestle in the upper part of the machine completely down during operation.
Working volume (L): 2.0
Housing: SUS304 (stainless steel)
- Standard type (Freestanding type)
The basic structure is a porcelain bowl (mortar) and a porcelain pestle (pestle).
Suitable for use in relatively small scale manufacturing up to about 7ℓ to research and development.
101/16/18/20/22/24
Standard type (Freestanding type)
Mortar volume used from 0.2ℓ to 7.0ℓ
This machine has only the stirring and crushing function, which is the basic function of the Ishikawa type stirring and crushing machine.
Functions can be upgraded by adding options such as an inverter and timer.
Working volume (L): 0.2/0.4/1.0/2.0/4.0/7.0
24R
Standard type (Freestanding type) tilted mortar
Since the No. 24 bowl with a porcelain mortar can be tilted forward, the contents of the mortar can be easily taken out and put in, and the pestle can also be replaced easily, improving work efficiency.
Working volume (L): 7.0
- Heating/cooling type Freestanding type
It is a machine equipped with a jacket that covers the mortar from the outside on a standard type and has a heating function by boiling water.
16/18/20/22/24(electric hot water boiling type)
Heating/cooling type (Freestanding)
This is a standard type machine of No. 101/16/18/20/22/24 with a built-in heating device equipped with a double pot (mortar and jacket) for heating the mortar uniformly from the outside.
By using a heat medium as oil and adding a heat insulating material, the inside of the mortar can be raised to 120°C. In the case of cooling, you can also put water etc. in the double pot to cool it.
*Cooling device is not built-in.
Working volume (L): 0.2/0.4/1.0/2.0/4.0/7.0
24R (heating/cooling type)
Heating/cooling type, Freestanding, tilted mortar
An electric hot water bath is attached to No. 24R, and stirring and crushing can be done while warming the mortar from the outside.
At the same time, the bowl tilts forward, which makes it easier to take out the contents of the bowl and put them in, and it also makes it easier to replace the pestle, improving work efficiency.
*Cooling device is not built-in.
Working volume (L) 7.0ℓ
Special 24R
Heating/cooling type, Freestanding, tilted/slide mortar
The bowl can be tilted by operating the handle manually. And slide up and down. It is convenient for putting in and taking out contents.
The machine shown in the photo is a double pot specification with hot water circulation heating system.
*Cooling device is not built-in.
Working volume (L) 7.0ℓ
- Vacuum type ( Freestanding type)
It is a machine equipped with a vacuum cover on a standard type and equipped with a deaeration function using a vacuum device.
16ZD/18ZD
Vacuum type ( Freestanding type)
It is a model with a fixed vacuum cover attached to the standard type of No. 16 and No. 18.
It can be used in combination with a vacuum pump for gas replacement with an inert gas such as argon gas or nitrogen gas, or for stirring and crushing treatment in a reduced pressure atmosphere.
Also used for defoaming
Working volume (L): 0.4ℓ, 1.0ℓ
24P
Vacuum type ( Freestanding type) tilted/slide mortar
A vacuum cover is attached to a No. 24 size machine, and in combination with a vacuum pump, stirring and crushing processing can be performed in the same environment as 16DZ and 18DZ, and in addition, an electric hot water boiling device can be installed and processing can be performed while heating. is.
The mortar can be lowered by a manual handle and rotated 90 degrees, which is convenient for putting in and taking out contents.
Working volume (L): 7.0
